Plumbing encompasses a lot of things. It covers items such as sinks, showers pipes, waste systems, etc. There are so many ways that one can can maintain and repair their own system for their own home needs. This article has advice that can help you find what you need to know to start.

Solder with safety in mind. When you solder a copper pipe you want to direct the flame on the copper pipe. The flame of the torch has to be four inches away from the piping. The flame should be targeted directly at the point where the copper piping needs to be disconnected.

Act quickly if your pipes freeze! Shut off the water and open the faucet, enabling it to drain when it thaws. Starting with the faucet, and working your way to the iced-up area, aim a propane torch or hairdryer at the pipe - this will quickly defrost it. You could also wrap the pipe in a heating pad or aim a heat lamp at it, but this will take quite some time. A last resort is to wrap the pipe in rags and pour boiling water over it.

Do not let your faucet leak. Did you know a leaky faucet can waste about 150 gallons of water every day? If you have a leak, never ignore it. It could be coming from the faucet or the pipes. Continually check pipes and faucets for extra moisture or small leaks.

Check your faucets for leaks. Check the knobs and the faucet itself. Hundreds of gallons of water a day can be wasted due to leaks and that's not good if you're paying your water bill. By stopping a leak now, you can save yourself a lot of money. Leaks can grow over time as well, so avoid a disaster and check all faucets for leaks! Read more here Plumbers Perth

If you aren't having any luck using a plunger on a clogged toilet, you may want to try pouring warm water into it from waist high. Once the water is lower, do this again.

During the winter, preventing frozen pipes when you live in a small dwelling can be something good to know. Frozen pipes will not only stop your flow of water but can crack and damage pipes. By running a little water out of every faucet during the coldest parts of the day, you can avoid this.

There are simple ways to check your toilet for leaks that can ultimately lead to great cost savings in the long run. The easiest way to do this is to pour a small amount of food dye into the holding tank of your toilet overnight. In the morning, if you have any color in the basin then you know you have a leak that needs some attention.

If you are having trouble removing a clean-out plug, there are two ways to do it. The first method you can try is using a chisel with a hammer to get the fitting loose. If the plug itself is expendable, chiseling it into pieces and extracting them can work, too.

No matter what plumber you use, you should know a little about him before he comes to the door. Even if your insurance company assigns a plumber to you, you can get online and learn his name and the quality of his work. If your insurer has just given you the name of a plumber, see if they have a website, read any testimonials and other feedback so you know what to expect once they arrive at your home.

In conclusion, plumbing is a very broad subject that covers a lot of everyday home improvements. There are some right ways and wrong ways to do it, but there is so much room for learning. Hopefully, this article gave you some advice on how to make plumbing work for you.

Who We Are

Whether you own a residential home or a commercial or retail space, we have local Plumbers Perth to do the right job in the right area.  In fact we have vans all over Perth with someone just around the corner from you right now!  No matter what plumbing trouble you find yourself in, we can help.  We’re the local leaders in all things plumbing and we get it right.